Product
  • standrackmachine12
Small Cable Tray Roll Forming Machine
Description: TheCable Tray Roll Forming MachineProduced by us, is used for producing cable trays that are used in different k
  • Case Info
  • Technical parameters
  • Feedback
The Cable Tray Roll Forming Machine Produced by us, is used for producing cable trays that are used in different kind of factories and buildings. We offering you to Cable Tray Machine that comprise of efficient Punching Press, Hydraulic Press, Electric Control penel and many other Equipment, which make it an ideal option for many. The Cable Tray Roll Forming Machinecan Manufacring a both superiority and quantity cable trays in less time.
  • De coiler 2 ton cap.
  • Entry Gate with
  • Roll Forming Line with 9 station, 1 Gear Boxes & 3H.P. electrical.
  • Control Panel semi auto
  • Cutting Unit
Technical Specifications : (Plate body)
  • Maximum sheet width that can be formed : 600 mm
  • Maximum sheet thickness in G I Strips that can be formed : 1 mm
  • Vertical distance between shafts : 100 mm
  • Horizontal distance between shafts : 190 mm
  • Number of forming stations : 9 nos.
  • Vertical station : 7 nos.
  • Total HP for Line : 3(ABB)
  • Speed of the machine : 4mt/minute
  • Size of machine : 1600 x 800 x 1100 mm

Mandrel Uncoiler

  • Coil weight : 2 MT Max
  • Coil width : 600 MM
  • Coil bore : 450 MM min, 510 MM max dia.
  • Mandrel movement : Manually adjusted
  • Back Tension : Manually adjusted

Entry Gate

Entry gate will be provided for movement of sheet to roll former.

Main Base

The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

Mill stands (Station)

The stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine. Each forming head consists of a fixed housing and sliding type out board housing. The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts the bearings are housed in the cartridge type bearing blocks. The bottom shaft bearings are located in the bored machined in the housings. The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.

Roll shafts

The roll shafts dia. 50 mm will be manufactured from quality steel and will be keyed to locate tooling.

Drive

The drive to the roll former will be by means of a gear box system. The main drive will be provided by means of 3 HP motor

Tooling

One set of Tooling with EN31 grade will be from imported material suitable for your machine as standard supply. The same is involved in operations like rough machining, keyway, rough profiling, bore grinding, profile machining and inspection with final template for above.

Feeder

  • Shaft Dia. - 60 mm
  • Inner - 200 mm
  • Material - EN 31
  • Motor H.P. - 1
  • Gear box - 1

Cutting Unit

10 tone Power press (with dais 2 set)

  • GEAR BOX – ELECON
  • Motor – ABB
  • Bearing -SKF
Recommended Project
Services
SHANGHAI BELIEVE INDUSTRY CO., LTD
LOCATION: 1338, Huancheng South Road, Nanqiao Town, Fengxian District, Shanghai, China
Email: darren@believeindustry.com darren@shrollforming.com
Phone/Whatsapp/Line: +86 18616927760
Skype: darren_mao
MoreDownload
MoreContact
SHANGHAI BELIEVE INDUSTRY CO., LTD
Email: info@believeindustry.com
           yoyo@believeindustry.com
Phone/Whatsapp/Line:
+86 18616927760
Skype:darren_mao